Topos, for battery packs, battery modules, battery cluster, and energy storage container companies, provides three major energy storage CCS solutions: wiring harness, FPC and PCB for industrial and commercial energy storage, home energy storage, communication energy storage, and portable energy storage.
Topos is fully familiar with the advantages and disadvantages of the three major energy storage CCS product solutions, and the provision of product solutions is based on the interests of customers.
Topos energy storage CCS: NTC chip + 10 years of precipitation of temperature sensing technology details + CCS technology, integrated independent research and development, better consistency and quality
Some friends' energy storage CCS: external NTC chips + lack of accumulation of temperature sensing technology + CCS technology.
DC/super charging is considered to be one of the key factors to promote the development of electric vehicles. Ultra short charging time requires excessive current, which puts great pressure on the power electronic equipment in the Charging station, and also makes thermal monitoring more critical. In order to ensure safe temperature monitoring and avoid overheating, the International Electrotechnical Commission (IEC) stipulates that the temperature sensor used in the connector system must meet the minimum requirements of the IEC TS 62196-3 1 DIN standard. Therefore, temperature sensors must have reliable measurement accuracy.
One of the few domestic NTC chips, sensors and wiring harness integrated development, consistent quality. It meets the requirements of energy storage wiring harnesses such as stable signal transmission, flexible structure/support design changes, high temperature/high pressure resistance/waterproof and moisture-proof temperature collection, aging resistance/flame retardant/life of more than 10 years, etc., and a high degree of automation for voltage collection.
Topos Temperature sensor/wiring harness for lithium battery equipment.
Distinctive features: easy to install and adapt to various installation requirements; stable performance (PT100, PT1000, high-precision and high-sensitivity NTC); resistance to electrolyte corrosion (surface anti-corrosion treatment, etc.), high withstand voltage, and high insulation.
Topos temperature sensor monitors and controls the battery temperature to prevent overheating, effectively prolong the service life of new energy vehicle batteries and enhance safety. For this reason, measure the battery temperature in multiple places (battery body, coolant, BMS board) to prevent local overheating!
Topos vehicle temperature management system includes temperature detection of electric motor, power battery cooling system, brake system and air conditioning system (condenser/air outlet) temperature detection to prevent overheating.
"We found: Topos energy storage fire-fighting temperature sensor is especially suitable for energy storage fire protection. The smallest diameter size can be achieved: 0.7mm. The fastest response speed can reach 1.5S (liquid medium). Topos provides temperature and humidity modules , temperature gas module, etc., can also transmit data wirelessly.”
This temperature sensor used in temperature control of Topos uses a single-ended glass-encapsulated thermistor with high precision and good reliability. For example, the double 85 test is 1000 hours, and the water boiling test is 1000 hours. With a special internal structure, the normal service life is more than 10 years.
Topos is the temperature monitoring and control of energy storage battery BMS, battery core (inner core) and battery core (periphery), customized product structure customization, accurate temperature measurement, good moisture resistance, one-stop delivery of wire harness processing and Serve.
To centrally recycle the lithium batteries that are about to be scrapped, and then realize the recycling of the batteries through the process of physical recycling, it is necessary to design a matching temperature collection product solution.
The upstream of the IDC data center (including heat dissipation and refrigeration in the computer room, fire protection, power distribution cabinets, IT and network equipment, communication energy storage, etc.) uses temperature sensors such as temperature control, fire protection, and power distribution, as well as communication energy storage wiring harnesses and energy storage CCS.
"Equipped with Ts16949, laboratory, very few domestic NTC chips, sensors and wiring harness integrated research and development, The first choice for domestic replacement, the quality, proofing and price are particularly good!
The waterproof level can reach IP67 level, which is easy to clean. It can withstand high temperature over 300°C, and is equipped with a non-slip handle design, which can be used in conjunction with the oven. The problem of high cost and easy water ingress of high-temperature food probes is solved.
Thermistor sensors for housing equipment can be used in water heaters, smart toilet seats, etc., for temperature detection and control of water supply or hot water, and liquid level detection.
Thermistors for household appliances can be used for temperature detection and control of various products such as microwave ovens, induction cookers, rice cookers, electric thermos bottles, coffee machines, and refrigerators.
When the motor is started, it needs to overcome its own inertia and the reaction force of the load at the same time, so the motor needs a large current and torque when it starts. Connect the PTC thermistor in series with the starting auxiliary coil. After starting, the PTC thermistor enters a high-impedance state and cuts off the auxiliary coil, which can exactly achieve this effect.
The core component of the electronic thermometer is the NTC temperature sensor that senses the temperature. Because it is used to measure the temperature of the human body, the accuracy, stability and sensitivity of the temperature sensor are required to be very high.